Skip to main content

Turuncu Solar

Home & Villa Solar

On-grid and hybrid systems for homes and villas — free pre-analysis, engineering and turnkey install.

CallWhatsApp

Suitable applications

  • Detached houses and villas
  • Seasonal homes
  • Homes with EV charging
  • Homes that need outage backup

See all references

Process

  1. Survey
  2. Engineering
  3. Installation
  4. Commissioning

Warranty & maintenance

  • Manufacturer warranties
  • Installation assurance
  • Remote monitoring support

Choosing a residential solar system

Residential sizing starts with monthly kWh and the time of day when energy is used, not the bill amount alone. Module count cannot be confirmed before roof orientation, pitch, shading, usable area and the electrical installation are checked. On-grid systems send daytime generation to household loads, while hybrid systems can support selected critical loads with a suitable battery.

Air conditioning, pool pumps, heat pumps and EV charging can materially change system size. If consumption may grow, future expansion should be considered in the inverter and switchboard design.

Is a battery required?

A battery is not mandatory for every home. Where the grid is stable and consumption is concentrated in daylight hours, an on-grid solution may be simpler. Hybrid architecture is considered when selected loads must run during outages, night consumption is high or the local grid is weak.

Battery capacity is not selected blindly from total daily use. Critical loads, required backup duration, inverter output, discharge limits and future expansion must be calculated together.

Frequently asked questions

Does home solar work during an outage?

A standard on-grid system shuts down during a grid outage for safety. Backup operation requires a suitable hybrid inverter, battery and a dedicated critical-load panel.

What if the roof is unsuitable?

If structure, shading or area is unsuitable, other roof faces, a solar carport or an eligible ground-mounted option can be assessed against technical and regulatory conditions.

Important notice

Pre-analysis is an estimate based on system type, location and consumption assumptions. A binding quote follows survey and engineering. KVKK/privacy consent is required to submit the form.