Skip to main content

Turuncu Solar

Hybrid Solar Systems

Grid + battery hybrid PV for outage resilience and day/night balance — survey to maintenance.

CallWhatsApp

Suitable applications

  • Homes that need outage backup
  • Businesses with critical loads
  • Weak-grid facilities
  • Sites shifting daytime generation to night use

See all references

Process

  1. Survey and load analysis
  2. Battery sizing
  3. Installation
  4. Commissioning

Warranty & maintenance

  • Battery and inverter warranties
  • System integration assurance
  • Maintenance options

What does hybrid solar solve?

A hybrid system combines PV, grid, battery and loads under one energy-management design. The goal is not merely to add a battery. Backup loads, outage duration, simultaneous power, solar generation and grid behaviour are defined as operating scenarios.

Without a properly separated critical-load panel, the battery may be oversized or fail to deliver the expected backup duration. Starting power for air conditioning, pumps, motors and resistive loads must also be assessed.

Battery capacity and safety

Usable battery energy depends on nominal capacity, permitted depth of discharge, temperature, cycle efficiency and ageing allowance. Proposals should compare usable energy, continuous power, cycle warranty, communications compatibility and service terms, not only the kWh label.

Battery placement must follow manufacturer requirements for ventilation, temperature, access, fire safety and electrical protection. The final location is confirmed after the survey.

Frequently asked questions

Can a hybrid system back up the whole building?

It may be technically possible, but capacity and cost can grow quickly. Critical loads are usually separated and the system is designed for the required backup duration.

Can a battery be added to an existing PV system?

The inverter, switchboard, connection architecture and manufacturer compatibility must be reviewed first. AC- or DC-coupled options are then assessed through engineering.

Important notice

Pre-analysis is an estimate based on system type, location and consumption assumptions. A binding quote follows survey and engineering. KVKK/privacy consent is required to submit the form.